Enco 12" x 36" Bench Lathe: Geared Head, 110/220 V-1 Phase, 1-1/2" Spindle Bore Dia, 65 to 1,810 RPM

Phase Single Spindle Speed Control Geared Head Bed Width (Inch) 7-1/8 Bed Width 181 mm Distance Between Centers (Inch) 36 Distance Between Centers 36 in Cross Slide Travel 130 mm; 5.12 in Gap Length (Decimal Inch) 9.0000 Gap Length 9 in; 229 mm Cross Slide Travel (Inch) 5-1/8 Swing 12 in Cross Slide Travel (Decimal Inch) 5.1200 Spindle Bore Diameter 38 mm Swing (Inch) 12 Spindle Bore Diameter (Inch) 1-1/2 Minimum Spindle Speed 65 Spindle Nose Designation D1-4 Maximum Spindle Speed 1810 Overall Height 22.8 in; 580 mm Overall Depth 750 mm; 29.5 in Minimum Metric Pitch (Decimal Inch) 0.4000 Number of Inch Threads 40 Minimum Metric Pitch 0.4 in Spindle Taper Size (Sleeve) 3MT Spindle Taper Size 5MT Tailstock Taper Size 3MT Tailstock Travel (Decimal Inch) 4.0000 Tailstock Travel 101.5 mm; 4 in UNSPSC Code 23242300 Maximum Threads Per Inch 60 Min. Longitudinal Feed Per Rev. (Decimal Inch) 0.0021 Overall Depth (Inch) 29-1/2 Overall Length (Inch) 66 Max. Longitudinal Feed Per Rev. (Decimal Inch) 0.0508 Maximum Longitudinal Feed Per Revolution 1.29 mm; 0.0508 in Minimum Cross Feed Rate Per Revolution 0.0004 in Min. Cross Feed Rate Per Revolution (Decimal Inch) 0.000400 Max. Cross Feed Rate Per Revolution (Decimal Inch) 0.0108 Maximum Cross Feed Rate Per Revolution 0.28 mm; 0.0108 in Swing Over Cross Slide (Decimal Inch) 7.0000 Swing Over Cross Slide (Inch) 7 Swing Over Gap (Inch) 18 Swing Over Gap (Decimal Inch) 18.0000 Swing Over Gap 18 in; 457 mm