Enco 14" x 40" Engine Lathe: Geared Head, 3 hp, 220 V-3 Phase, 1-1/2" Spindle Bore Dia, 45 to 1,800 RPM

Phase Three Spindle Speed Control Geared Head Bed Width (Inch) 8.1250 Bed Width (Inch) 8-1/8 Bed Width 8.125 in; 206.38 mm Distance Between Centers (Inch) 40 Distance Between Centers 40 in Cross Slide Travel 6 in Gap Length (Decimal Inch) 9.3750 Gap Length 9.375 in Cross Slide Travel (Inch) 6 Swing 14 in Cross Slide Travel (Decimal Inch) 6.0000 Spindle Bore Diameter 38 mm Swing (Inch) 14 Spindle Bore Diameter (Inch) 1-1/2 Minimum Spindle Speed 45 Spindle Nose Designation D1-4 Maximum Spindle Speed 1800 Overall Height 46.4567 in; 1180 mm Overall Depth 740 mm; 29 in Minimum Metric Pitch (Decimal Inch) 0.4500 Number of Inch Threads 44 Minimum Metric Pitch 0.45 in Spindle Taper Size 5MT Tailstock Taper Size 3MT Tailstock Travel (Decimal Inch) 4.7244 Tailstock Travel 120 mm; 4.7244 in UNSPSC Code 23242300 Maximum Threads Per Inch 112 Min. Longitudinal Feed Per Rev. (Decimal Inch) 0.0012 Overall Depth (Inch) 29 Max. Longitudinal Feed Per Rev. (Decimal Inch) 0.0294 Maximum Longitudinal Feed Per Revolution 0.0294 in; 0.75 mm Minimum Cross Feed Rate Per Revolution 0.0003 in Min. Cross Feed Rate Per Revolution (Decimal Inch) 0.000300 Max. Cross Feed Rate Per Revolution (Decimal Inch) 0.0100 Maximum Cross Feed Rate Per Revolution 0.01 in; 0.25 mm Swing Over Cross Slide (Decimal Inch) 8.6250 Swing Over Cross Slide (Inch) 8-5/8 Swing Over Gap (Inch) 20 Swing Over Gap (Decimal Inch) 20.0000 Swing Over Gap 20 in; 508 mm