Clausing Manual Surface Grinder: 20" Table Length, 10" Table Width, 3 Phase, 3,450 RPM, 230 & 460V-3 hp, 1-1/4" Arbor Hole Dia, 8" Wheel Dia, 1" Wheel Width

Arbor Hole Diameter (Decimal Inch) 1.2500 Arbor Hole Diameter 31.75 mm; 1.25 in Arbor Hole Diameter (Inch) 1-1/4 Arbor Hole Diameter (mm) 31.75 Operation Type Automatic Machine Type Floor Spindle Speed 3450 Table Length 20 in; 508 mm Wheel Diameter (Inch) 8 Table Width 254 mm; 10 in Wheel Diameter 8 in; 203.2 mm Wheel Width (Decimal Inch) 1.0000 Wheel Width (Inch) 1 Wheel Width 1 in; 25.4 mm Table Speed 196.8500 to 984.2520 in/min; 5.00 to 25.00 m/min Phase Three Maximum Cross Grinding Width (Decimal Inch) 11.0000 Maximum Cross Grinding Width (Inch) 11 Maximum Cross Grinding Width (mm) 279.40 Hydraulic Motor Horsepower (HP) 2.00 AC Motor Horsepower 3 Maximum Automatic Crossfeed Transverse Travel 10.6299 in; 270 mm Maximum Cross Grinding Width 279.4 mm; 11 in Maximum Spindle Centerline To Table Distance 19.68 in Maximum Spindle Centerline to Table Distance (mm) 19.68 Maximum Longitudinal Table Travel 620 mm; 24.4094 in; 580 mm; 22.8347 in Maximum Longitudinal Grinding Length 520 mm; 20.4724 in Feed Per Graduation Of Handwheel 0.0008 in Maximum Manual Crossfeed Transverse Travel 11.81102 in; 300 mm UNSPSC Code 23241402 Feed Per Revolution Of Handwheel 0.1969 in Feed Rate Per Graduation Of Handwheel 0.02 mm Feed Rate Per Revolution Of Handwheel 5 mm Overall Length (Inch) 95 Voltage 230/460 V Overall Length 2400 mm; 95 in Vertical Downfeed Handwheel Per Graduation 0.005 mm; 0.0002 in Vertical Downfeed Handwheel Per Revolution 0.0394 in; 1 mm Vertical Downfeed Rapid Travel 6 Max. Longitudinal Grinding Length (Decimal Inch) 20.4724 Max. Spindle Center to Table Dist. (Decimal Inch) 19.6800 Max. Hydraulic Long. Table Travel (Decimal Inch) 22.8347 Max. Manual Cross Transverse Travel (Decimal Inch) 11.811020 Feed Per Revolution of Handwheel (Decimal Inch) 0.1969 Feed Rate Per Revolution of Handwheel (mm) 5.00 Feed Per Graduation of Handwheel (Decimal Inch) 0.0008 Feed Rate Per Graduation of Handwheel (mm) 0.02 Vertical Down Handwheel Per Rev. (Decimal Inch) 0.0394 Vertical Downfeed Handwheel Per Revolution (mm) 1.00 Vertical Down Handwheel Per Grad. (Decimal Inch) 0.0002