Clausing Manual Surface Grinder: 24" Table Length, 12" Table Width, 3 Phase, 1,750 RPM, 230 & 460V-5 hp, 3" Arbor Hole Dia, 12" Wheel Dia, 1-1/4" Wheel Width

Arbor Hole Diameter (Decimal Inch) 3.0000 Arbor Hole Diameter 3 in; 76.2 mm Arbor Hole Diameter (Inch) 3 Arbor Hole Diameter (mm) 76.20 Operation Type Automatic Machine Type Floor Spindle Speed 1750.0 Table Length 609.6 mm; 24 in Wheel Diameter (Inch) 12 Table Width 304.8 mm; 12 in Wheel Diameter 304.8 mm; 12 in Wheel Width (Decimal Inch) 1.2500 Wheel Width (Inch) 1-1/4 Wheel Width 31.75 mm; 1.25 in Table Speed 196.8500 to 984.2520 in/min; 5.00 to 25.00 m/min Phase Three Maximum Cross Grinding Width (Decimal Inch) 11.8110 Maximum Cross Grinding Width (mm) 300.00 Maximum Longitudinal Grinding Length (Inch) 23-5/8 Hydraulic Motor Horsepower (HP) 2.00 Maximum Automatic Crossfeed Transverse Travel 310.0 mm; 12.2047 in Maximum Cross Grinding Width 11.811 in; 300.0 mm Maximum Spindle Centerline To Table Distance 23 in; 584.2 mm Maximum Spindle Centerline to Table Distance (mm) 584.20 Maximum Longitudinal Table Travel 25.5906 in; 28.74 in; 650.0 mm; 730.0 mm Maximum Longitudinal Grinding Length 600.08 mm; 23.625 in Feed Per Graduation Of Handwheel 0.0008 in Maximum Manual Crossfeed Transverse Travel 340.11 mm; 13.39 in UNSPSC Code 23241402 Feed Per Revolution Of Handwheel 0.1969 in Feed Rate Per Graduation Of Handwheel 0.02 mm Feed Rate Per Revolution Of Handwheel 5.0 mm Voltage 230/460 V Overall Length 2700.0 mm; 106.299 in Vertical Downfeed Rapid Travel 6 Max. Longitudinal Grinding Length (Decimal Inch) 23.6250 Vertical Downfeed Slow Travel 0.2362 Vertical Downfeed Step Feed 0.00004 in; 0.001 mm Max. Spindle Center to Table Dist. (Decimal Inch) 23.0000 Max. Hydraulic Long. Table Travel (Decimal Inch) 25.5906 Max. Manual Cross Transverse Travel (Decimal Inch) 13.390000 Feed Per Revolution of Handwheel (Decimal Inch) 0.1969 Feed Rate Per Revolution of Handwheel (mm) 5.00 Feed Per Graduation of Handwheel (Decimal Inch) 0.0008 Feed Rate Per Graduation of Handwheel (mm) 0.02