PROXXON 24400 24400 PROX24400

For machining steel, brass, aluminum and plastic. For face and flat turning, taper turning tapping. For face and straight turning, taper turning and tapping. With a wide range of system accessories, you can drill, mill and groove at the same time.

Machine bed: High quality cross with wide leg, prismatic slides anchored cast iron. For vibration-free operation even at high loads. With flange and threaded holes at the back for fastening the drill and mill head PF 400. Finished work material.

Mirror: Made of die-cast aluminum. Oversized main spindle with two adjustable tapered roller bearings and MK 3 bore on chuck side. Spindle bore 20.5 mm. Runout 1/100 mm without mirror. Rotary switch (optionally 0.07 and 0.14 mm / turn) to lock the automatic feed. Trapezoid toothed push and feed spindle (12 x 1.5 mm)

Tailstock Head: Made of die-cast aluminum. The head Ø 24mm can be rolled up to a distance of 40mm. Scale in mm. With live-center MK 2 and chuck with 10 mm threaded outer (B 12-hole / MK 2).

Support: Bearing carrier made of die-cast zinc. 85 mm) and top slide (adjustment range 52 mm). Top slide can be rotated for taper turning (graded increments up to 45 ° are available.) With multiple tool posts and two tool post elements for quick change-over and easy height adjustment. For 10 x 10 mm turning tools.

Drive : Powerful capacitor motor for two revolutions and additional three-stage belt drive.

Spindle in step 1 speeds : 80 - 330 - 1,400 rpm.

For stage 2: 160 - 660 and 2,800 rpm.

Lathe chuck: DIN 6386 High quality 3-jaw chuck for Class 1 (concentricity tolerance 0.04mm) compliant. Capacity over reverse working mirrors 3 - 100 mm. Chuck housing with safety shut-off is included.

Handwheels: Made of aluminum, the scale ring can be set to 0.

For cross slide and top slide: 1 division = 0.025 mm. 1 revolution = 1.5 mm.

For tailstock and thrust spindle: 1 step line = 0.05 mm. 1 speed = 1.5 mm 

Support quick adjustment: Through the large handwheel connected to the bed with gear racks.

Threading cutting device: < / strong> For left and right thread: with interchangeable gears for 19 different metric pitches: 0.2 - 0.25 - 0.3 - 0.4 -0.45 - 0.5 - 0.6 - 0.7 - 0.8 - 0.9 - 1 - 1.25 - 1.5 - 1.75 - 2 - 2.5 - 3mm Also for inch gears between 10 - 48 TPI.